|
|
Solid Particle Emissions from AgroPellets Combustion
Svoboda, Marek ; Milčák, Pavel (referee) ; Lisý, Martin (advisor)
This thesis is divided into two parts. The first part deals with defining the main concepts, properties of biomass and pellets. Further, the procedures for measuring agropellets properties according to valid standards are mentioned. The following is a selection of the raw materials for the production of agropellet, with the determination of their properties. The theoretical part closes background research emissions from combustion and emission standards for a solid fuel boiler. The second part is an experimental one, which determines the formation of solid pollutants in combustion of four types of pellets made from alternative sources. Here are the graphs of the gaseous emissions of each of them. At last there will be a comparison of emissions agro pellets with more widespread wood pellets.
|
|
|
Forming of solid pollutants from biomass
Havlínová, Denisa ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor‘s thesis is divided into two main parts. The first part is research and deals mainly with biomass and pollutants. In this section, we will find a two-dimensional distribution of biomass, a comparison of fuel forms and a discussion of basic pollutants with a focus on solid pollutants. The second part is experimental. It starts with a fuel laboratory, where the water, ash and heat content of the biofuels examined is determined. The following is an investigation of the dependence of the PM formation on the properties of the biomass, which was measured by the measurement of these PM by the filters in the collecting device, while the examined biofuels were gradually burned on the fireplace insert.
|
|
|
The development of grouting for additional sealing of embankment dams
Michalčíková, Magdaléna ; Klablena,, Petr (referee) ; Drochytka, Rostislav (advisor)
Seal of sand or gravel by chemical injection is known and used for a long time. Chemical grouting are however expensive and sometimes the use of cement does not lead to desire effects. So it is trying to find new materials and methodologies injection arrangement works. To achieve savings of chemical products are added to a mixture clay and cement. Clay-cement grouting mix are used not only in order that they are better quality, but also because in this way proposed mixtures have a tendency to penetrate better into incoherent sediments that need additional sealant of chemical injection. For further possible reductions of economic terms the mixture is trying to replace the classic clay. As a suitable substitute for classic clay is to a certain extent the use of secondary raw materials. Above all it is fly ash. As a part of my thesis I deal with the appropriateness use of these materials and examining their properties in the mixture. It was found that by using fly ash were improving consistency of the fresh mixture, reducing the amount of water-cement ratio and reduce shrinkage of the mixture. On the other hand, by using fly ash has been increasing decantation, permeability atc. In the next stage of my work was examined the influence of the quality of cement, lime and liquefaction in the mixture. The aim of thesis is to propose the optimal injection mixture for additional sealing earth dams.
|
|
|
Influence of fly ash containing products after flue gases denitrification to corrosion of metal parts of technological units
Řezanina, Marek ; Tkacz, Jakub (referee) ; Opravil, Tomáš (advisor)
This thesis deals with the influence of fly ash containing residues of flue gas denitrification after SNCR method. There are remains of ammonium compounds and bicarbonate compoudns, especially the hydrogen ammonium sulphate in solid combustion products, when using the SNCR method. This substance itself is corrosive, and it releases ammonium ions to the solution and releases an ammonia gas in case the pH is higher than 9. Because the fly ash gets processed, transported, and if you add lime it also produces the so called stabilizate. it is necessary to think about the corrosion of equipment in which these processes take place. The aim of this thesis is to assess the degree of corrosion of various types of steel in corrosive environments described above.
|
|
|
Vorm conveyor
Mazálek, Karel ; Jonák, Martin (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis consists of calculations, design and drawings of an inclined screw conveyor used for transporting ash from the powerplant. The technical report contains basic calculations as well as selected strength calculations. Drawing part consists of assebly drawing and welding subassembly of trough end. KEYWORDS
|
|
|
The basic chemical parameters of several varieties of cherries
Boberová, Jana ; Vespalcová, Milena (referee) ; Hrstka, Miroslav (advisor)
This bachelor thesis deals with determination of basic chemical parameters in sweet cherry (Prunus avium). In the theoretical part, the taxonomic classification of the cherry, its botanical characteristics and the pomology of several cultivars are mentioned. Also, the history of cultivation, appropriate conditions and most common diseases are listed. The last chapter deals with the chemical composition of the fruits. In the experimental part, the determination of selected chemical parameters of various cultivars (Karešova, Napoleonova and Stark Gold) were determined. The content of total solids was determined in the range of 14.53–18.15 %, soluble solids 13.96–16.44 %, ash 0.34–0.44 %, reducing sugars 6.89–10.18 % and nitrogenous substances 0.056–0.116 %. Ascorbic acid content was set at 26.1–44.1 mg/kg. The titratable acidity was determined in the range of 6.15–8.86 g of predominant malic acid in 1 kg of cherry and a formol number was determined from 194 to 297 ml of 0.1 M NaOH per 1 kg of edible fraction. The amount of anthocyanins was determined at 4–686 mg cyanidin-3-rutinoside/kg and total phenolic compounds at 0.91–1.47 g gallic acid/kg. All data are based on fresh fruit weight.
|
|
|
The basic chemical parameters of several varieties of sour cherries
Komárek, Šimon ; Vítová, Eva (referee) ; Hrstka, Miroslav (advisor)
This bachelor thesis deals with determination of basic chemical parameters in sour cherry (Prunus cerasus). Three different cultivars Köröšská, Pandy 6039 and Šumadinka were examined. The content of total solids varied from 13,32 to 15,22 %, soluble solid content amounted for 12,04–14,60 %, ash 0,4 %, reducing sugars 4,9–6,9 %, nitrogenous substances 0,11–0,12 %, L-ascorbic acid 343–456 mg/kg. Titratable acidity ranged from 15,1 to 21,8 g malic acid equivalent/kg, formol number 268–373 ml of 0,1 NaOH/kg. Total anthocyanins varied from 308 to 1104 mg cyanidin 3-glucoside equivalent/kg and total phenolics ranged from 1,05 to 3,99 g gallic acid equivalent/kg. All data are applied to fresh fruit weight.
|
|
|
Possibilities of using different types of admixtures in shotcrete technology
Berčík, Martin ; Brožovský, Jiří (referee) ; Hubáček, Adam (advisor)
The Bachelor’s thesis is conceived in the form of research findings on current knowledge of inert and active ingredients and their effects on the shotcrete. It focuses mainly on the composition of individual ingredients, their function executing in the concrete mix and explains how they affect the selected physical and mechanical properties. The work enlightes the importance of using co-products from the industry production as an additive to concrete in terms of both ecological and partly economical.
|
|
| |
|
|
Rehabilitation technology of embankment dams by using suitable types of waste
Michalčíková, Magdaléna ; Kulísek, Karel (referee) ; Drochytka, Rostislav (advisor)
The subject of this work is to find an optimal technology for repairing existing embankment dams with emphasis on simplicity and ecological scalability. Next, secondary energy and waste materials will be evaluated as a partial replacement of a quality montmorillonitic clay. The aim of this will be to maximize the use of these waste materials. In the end a selection of materials for the locality will be made. The use of appropriate types of waste for repairs of embankment dams with clay based grouting compound technology has a great potential, especially with those dams that are not fulfilling their function due to their age.
|
guest ::
